Inverterski varilni aparat za varjenje po metodi TIG in TIG PULSE z izmeničnim (AC) in enosmernim (DC) tokom z brezkontaktnim (HF) vžigom obloka ter po metodi MMA z oplaščeno elektrodo z enosmernim tokom (DC). Napajanje 230V, varilni tok 10-230A.

 

Značilnosti:

 

• Inverterski varilni aparat za varjenje po metodi TIG in TIG PULSE z izmeničnim (AC) in enosmernim (DC) tokom z brezkontaktnim (HF) vžigom loka ter po metodi MMA z oplaščeno elektrodo z enosmernim tokom (DC).
• Enofazno napajanje.
• Omogoča varjenje aluminija, ogljikovih in nerjavnih jekel, niklja, titana, brez-kisikovega bakra, brona.
• Pregleden in enostaven za uporabo panel v slovenskem jeziku.
• Elektronsko krmiljena gladka regulacija varilnega toka.
• Pri varjenju po metodi TIG: regulacija začetnega toka, regulacija glavnega toka, regulacija časa padanja toka, regulacija zakasnitve izklopa zaščitnega plina, regulacija AC ravnotežja, regulacija AC frekvence.
• Pri metodi TIG PULS dodatno: regulacija frekvence pulzacije, regulacija osnovnega toka, regulacija časa pulza.
• Funkcija 2-takt / 4-takt.
• Ima funkcije, ki olajšajo proces varjenja po metodi MMA z oplaščeno elektrodo:
• ARC FORCE: regulacija toka kratkega stika - olajša prenos kapljice staljene elektrode na varjeni material, preprečuje ugašanje loka med stikom kapljice elektrode z varilnim jezerom
• HOT START: vroči zagon - olajša vžig elektrode z zagotavljanjem večjega varilnega toka pri vsakem vžigu loka.
• Maksimalni premer oplaščene elektrode 4,0.
• Opremljen z digitalnim zaslonom.
• Hlajen z ventilatorjem.
• Zaščita pred preobremenitvijo.
• Cena naprave s kompletom dodatkov TIG in MMA: z varilnim ročajem TIG 4m, elektrodnim kablom MMA 3m, masnim kablom 3m, regulatorjem tlaka, rezervnimi deli ročaja.

FIZIKALNI PARAMETRI
Stopnja zaščite	IP 21
Teža	29 kg
Dimenzije dolžina x širina x višina	500x330x330 mm
TEHNIČNI PARAMETRI
Moč	7,6 kW
Napetost brez obremenitve	42 V
Tok pri delu 60%	200 A
Premer varilne elektrode	1,6 - 4,0
Obseg regulacije varilnega toka	10 - 200 A (max 230 A)
PARAMETRI NAPAJANJA
Tok, ki ga porablja omrežje	24 A
Zaščita napajalnega omrežja	25 A
Nazivna napetost napajanja	230 V; 50Hz (1ph)

 

 

MAX-TIG 232 AC/DC DIGITAL Inverter welder for welding using TIG and TIG PULSE methods with alternating current (AC) and direct current (DC) with non-contact (HF) arc ignition, as well as MMA method with a coated electrode using direct current (DC). Single-phase power supply. Allows welding of aluminum, carbon and stainless steels, nickel, titanium, oxygen-free copper, bronze. Clear and easy-to-use panel in Slovenian. Electronically controlled smooth adjustment of welding current. For TIG welding: initial current adjustment, main current adjustment, current down-slope time adjustment, shielding gas shut-off delay adjustment, AC balance adjustment, AC frequency adjustment. For TIG PULSE method additionally: pulse frequency adjustment, base current adjustment, pulse time adjustment. 2-stroke / 4-stroke function. It has functions that facilitate the MMA welding process with a coated electrode: ARC FORCE: short-circuit current adjustment - facilitates the transfer of the molten electrode drop to the welded material, preventing arc extinction when the electrode drop contacts the weld pool HOT START: hot start - facilitates electrode ignition by providing higher welding current at each arc ignition. Maximum diameter of coated electrode 4.0. Equipped with a digital display. Fan-cooled. Overload protection. Price of the device with a complete set of TIG and MMA accessories: TIG welding torch 4m, MMA electrode cable 3m, ground cable 3m, pressure reducer, spare parts for the torch. 12-month warranty. Technical data: Rated supply voltage: 230 V; 50Hz (1ph) Current drawn from the network: 24 A Power: 7.6 kW Open circuit voltage: 42 V Welding current adjustment range: 10 - 200 A (max 230 A) Current at 60% duty cycle: 200 A Welding electrode diameter: 1.6 - 4.0 Power supply network protection: 25 A Protection degree: IP 21 Device / set weight: 29 kg